PMC engineers a complete product line for Urethane Spray Systems including proportioning units, a uniquely designed heated hose system, transfer pumps, spray guns and the auxiliary equipment required by a contractor to successfully and economically apply residential foam insulation, roofing, pour foam, Polyurea and Polyurea hybrid coatings. Manufactured in the USA, all of PMC’s products are the direct result of customer input, innovation, creativity and the perfectionist spirit of its engineers.

Contact Appalachian today for information and pricing on the complete line of PMC products and accessories.

Call 877-944-7697 or use the form below for info.

PH-2   2000 psi (138 bar) – Ideal for Residential Foam Insulation Applications

Offering the “Most Affordable Hydraulic Proportioner with Horizontal Pumps”
Includes Pressure Balance Control System, Inlet Monitoring and Count Down Shutoff

PH-2
Output
28 lbs/min
(12.70 kg/min)
Max Working Pressure
2,000 psi (138 bar)
Max Hose Length
210 ft (64 m) w/70V Trans
310 ft (94.5 m) w/90V Trans
410 ft (121.9 m) w/120V Trans
Heater Wattage
7,500 watts Total (Single htr)
9,000 watts Total  (Single htr)
10,500 watts Total  (Single htr)
Hose Heating Power
70 Volt, 90 Volt or 120 Volt
Max Fluid Temperature
190 °F (87.7 °C)
Air Consumption
@ 100 psi (6.9 bar)
Not Applicable
Main Voltage
1 x 208-230V, 60 Hz
Electrical @
61A–7,500W heaters
67A–9,000W heaters
72A–10,500W heaters
Main Voltage
3 x 208-230V, 50/60 Hz,
3 x 380V, 50/60 Hz
Electrical @
40A–7,500W heaters
46A–9,000W heaters
51A–10,500W heaters
Dimensions
44”w x 22”d x 54”h
(111 cm x 55 cm x 137 cm)
Weight
415 lbs
(188 kg)

Call 877-944-7697 or use the form below for info.

PH-25   2000 psi (138 bar) – Ideal for Residential Foam Insulation Applications

Includes Pressure Balance Control System and Count Down Shutoff

PH-25
Output
30 lbs/min (14.06 kg/min)
Max Working Pressure
2,000 psi (138 bar)
Max Hose Length 310 ft (94.5 m)
Heater Wattage
8,000 watts Total (Dual htr)
10,000 watts Total (Dual htr)
12,000 watts Total (Dual htr)
Hose Heating Power 90 Volts
Max Fluid Temperature 190 F (87.7 C)
Air Consumption
@ 100 psi (6.9 bar)
Not Applicable
Main Voltage
1 x 208-230V, 60 Hz
Electrical @
61A–8,000W heaters
70A–10,000W heaters
78A–12,000W heaters
Main Voltage
3 x 208-230V, 50/60 Hz,
3 x 380V, 50/60 Hz
Electrical @
40A–8,000W heaters
49A–10,000W heaters
57A–12,000W heaters
Dimensions
40”w x 26”d x 52”h
(101cm x 66cm x 132cm)
Weight
500 lbs (228.6 kg)

(113.4 kg)

Call 877-944-7697 or use the form below for info.

PH-40   2000 psi (138 bar) – Ideal for use in High Output Roofing Applications

Includes Pressure Balance Control System and Count Down Shutoff

PH-40
Output
40 lbs/min
(18.14 kg/min)
Max Working Pressure
2,000 psi (138 bar)
Max Hose Length
410 ft (121.9 m)
Heater Wattage
15,000 watts Total (Dual htr)
18,000 watts Total (Dual htr)
21,000 watts Total (Dual htr)
Hose Heating Power
120 Volts
Max Fluid Temperature 190 F (87.7 C)
Air Consumption
@ 100 psi (6.9 bar)
Not Applicable
Main Voltage
1 x 208-230V, 60 Hz
Electrical @
130A–15,000W heaters
Main Voltage 3 x 208-230V, 50/60 Hz,
3 x 380V, 50/60 Hz
Electrical @
75A–15,000W heaters
89A–18,000W heaters
103A–21,000W heaters
Dimensions
40”w x 26”d x 52”h
(101cm x 66cm x 132cm)
Weight
555 lbs(251.7 kg)

Call 877-944-7697 or use the form below for info.

PH-55 2000 psi (138 bar)

The PMC “Classic” Series was “Designed with the Customer in Mind” to provide applicator friendly and
serviceability to meet today’s market place demands.

PH-55/PHX-55
Output 55 lbs.min (24.95 kg/min)/3.25 gal/min
(12.3 liters/min)
Max Working Pressure
2000 psi (138 bar)/3500 psi (241 bar)
Max Hose Length 410 ft (121.9 m)/410 ft (121.9 m)/21,000 watts (Total)
Heater Wattage 21,000 watts (Total)/21,000 watts (Total)
Hose Heating Power 120 volts/120 volts
Max Fluid Temperature 190 °F (87.7 °C)/190 °F (87.7 °C)
Weight (w/o Hydraulic Fluid) 655 lbs (297.1 kg)/655 lbs (297.1 kg)
Electrical 107 amps @ 3 x 230V/107 amps @ 3 x 230V
Dimensions 40”w x 53.5”h x 26”d
(101.6cm x 135.9cm x 66cm)/40”w x 53.5”h x 26”d
(101.6cm x 135.9cm x 66cm)

Call 877-944-7697 or use the form below for info.

The PMCA Plural Component Proportioners

The PMCA Series of proportioners is air driven with opposed piston pumps. This unit ranges in outputs to 20 lbs/min (9.07 kg/min) at up to 1600 psi (110 bar) and outputs to 1.2 gal/min (4.54 liters/min) at up to 2400 psi (165 bar). This series is ideally suited for in-plant operations such as spa insulations, bed-liner or cavity fill.

PMCA-20
Output 1.2 gal/min (4.54 liters/min)
Max Working Pressure 2,400 psi (165 bar)
Max Hose Length 310 ft (94.5 m)
Heater Wattage 7,500 watts Total (Single Heater)
Hose Heating Power 90 Volts
Max Fluid Temperature 190 F (87.7 C)
Air Consumption
@ 100 psi (6.9 bar)
26 scfm
Main Voltage 1 x 208-230V, 50/60 Hz
Electrical @ 45A–7,500W heaters
Main Voltage 3 x 208-230V, 50/60 Hz,
3 x 380V, 50/60 Hz
Electrical @ 38A–7,500W heaters
Dimensions 40”w x 19”d x 52”h
(101cm x 48.cm x132cm)
Weight 250 lbs
(113.4 kg)

Call 877-944-7697 or use the form below for info.

The PA SeriesPlural Component Proportioners

The PA Series of proportioners is air driven with vertical piston pumps. The two models in this series range in outputs to 25 lbs/min (11.36 kg) at up to 2000 psi (138 bar) and outputs to 1.3 gal/min (4.92 liters/min) at up to 3000 psi (207 bar). This series is an excellent economical choice for low output jobs such as residential insulation, spas and bed-liners.

PA-25
Output
25 lbs/min@1250 psi
(11.36 kg@86.18 bar)
Max Working Pressure
2,000 psi (138 bar)
Max Hose Length
310 ft (94.5 m)
Heater Wattage 7,500 watts Total (Single Heater)
Hose Heating Power 90 Volts
Max Fluid Temperature 190 F (87.7 C)
Air Consumption
@ 100 psi (6.9 bar)
33 scfm
Main Voltage 1 x 208-230V, 50/60 Hz
Electrical @
40A–7,500W heaters
Main Voltage 3 x 208-230V, 50/60 Hz,
3 x 380V, 50/60 Hz
Electrical @ 38A–7,500W heaters
Dimensions
28”w x 26”d x 52” h
(71cm x 66cm x 132cm)
Weight
265 lbs (120 kg)

Call 877-944-7697 or use the form below for info.

PHX-2   3000 psi (207 bar) – Ideal for Use in Plural Component Coatings Applications

Offering the “Most Affordable Hydraulic Proportioner with Horizontal Pumps”
Includes Pressure Balance Control System, Inlet Monitoring and Count Down Shutoff

PHX-2
Output
1.7 gal/min
(6.43 liters/min)
Max Working Pressure
3,000 psi (206 bar)
Max Hose Length
210 ft
(64 m)
w/70V Trans
310 ft
(94.5 m)
w/90V Trans
410 ft
(121.9 m)
w/120V Trans
Heater Wattage
14,000 watts Total
(Single Heater)
Hose Heating Power 70 Volt, 90 Volt or 120 Volt
Max Fluid Temperature 190 F (87.7 C)
Air Consumption
@ 100 psi (6.9 bar)
Not Applicable
Main Voltage 1 x 208-230V, 50/60 Hz
Electrical @
108A–14,000W heaters
Main Voltage
3 x 208-230V, 50/60 Hz,
3 x 380V, 50/60 Hz
Electrical @
69A–14,000W heaters
Dimensions
44”w x 22”d x 54”h
(111 cm x 55 cm x 137 cm)
Weight
415 lbs (188 kg)

Call 877-944-7697 or use the form below for info.

PHX-25   3000 psi (207 bar) – Ideal for Use in Plural Component Coatings Applications

Includes Pressure Balance Control System and Count Down Shutoff

PHX-25
Output
1.9 gal/min
(7.19 liters/min)
Max Working Pressure
3,000 psi (206 bar)
Max Hose Length
310 ft (94.5 m)
Heater Wattage
8,000 watts Total (Dual htr)
10,000 watts Total (Dual htr)
12,000 watts Total (Dual htr)
Hose Heating Power 90 Volts
Max Fluid Temperature 190 F (87.7 C)
Air Consumption
@ 100 psi (6.9 bar)
Not Applicable
Main Voltage 1 x 208-230V, 50/60 Hz
Electrical @
61A–8,000W heaters
70A–10,000W heaters
78A–12,000W heaters
Main Voltage 3 x 208-230V, 50/60 Hz,
3 x 380V, 50/60 Hz
Electrical @
40A–8,000W heaters
49A–10,000W heaters
57A–12,000W heaters
Dimensions
40”w x 26”d x 52”h
(101cm x 66cm x 132cm)
Weight
500 lbs (228.6 kg)

Call 877-944-7697 or use the form below for info.

PHX-40   3500 psi (241 Bar) – Ideal for use in High Output Plural Component Coatings Applications

Includes Pressure Balance Control System and Count Down Shutoff

PHX-40
Output 2.8 gal/min
(10.59 liters/min)
Max Working Pressure
3500 psi (241 bar)
Max Hose Length
410 ft (121.9 m)
Heater Wattage
15,000 watts Total (Dual htr)
18,000 watts Total (Dual htr)
21,000 watts Total (Dual htr)
Hose Heating Power
120 Volts
Max Fluid Temperature 190 F (87.7 C)
Weight (w/o Hydraulic Fluid)
555 lbs (251.7 kg)
Electrical @ 15KW Heaters
75 amps @ 3 x 230V
130 amps @ 1 x 230V
Electrical @ 18KW Heaters
89 amps @ 3 x 230V
Electrical @ 21KW Heaters 103 amps @ 3 x 230V

Call 877-944-7697 or use the form below for info.

PH-55 2000 psi (138 bar)

The PMC “Classic” Series was “Designed with the Customer in Mind” to provide applicator friendly and
serviceability to meet today’s market place demands.

PH-55/PHX-55
Output 55 lbs.min (24.95 kg/min)/3.25 gal/min
(12.3 liters/min)
Max Working Pressure
2000 psi (138 bar)/3500 psi (241 bar)
Max Hose Length 410 ft (121.9 m)/410 ft (121.9 m)/21,000 watts (Total)
Heater Wattage 21,000 watts (Total)/21,000 watts (Total)
Hose Heating Power 120 volts/120 volts
Max Fluid Temperature 190 °F (87.7 °C)/190 °F (87.7 °C)
Weight (w/o Hydraulic Fluid) 655 lbs (297.1 kg)/655 lbs (297.1 kg)
Electrical 107 amps @ 3 x 230V/107 amps @ 3 x 230V
Dimensions 40”w x 53.5”h x 26”d
(101.6cm x 135.9cm x 66cm)/40”w x 53.5”h x 26”d
(101.6cm x 135.9cm x 66cm)

Call 877-944-7697 or use the form below for info.

PAX-25   3000 psi (207 bar) – Ideal for Use in Plural Component Coatings Applications

The reliable pneumatic drive will generate up to 3,000 psi spray pressure, ideal for spraying fast set bedliners and specialized polyurea, polyurethane and hybrid coatings.

PAX-25
Output
1.3 gal/min
(4.92 liters/min)
Max Working Pressure
3,000 psi (207 bar)
Max Hose Length
310 ft (94.5 m)
Heater Wattage
7,500 watts Total
(Dual Heaters)
Hose Heating Power 90 Volts
Max Fluid Temperature 190 F (87.7 C)
Air Consumption
@ 100 psi (6.9 bar)
33 scfm
Main Voltage
1 x 208-230V, 50/60 Hz
Electrical @
48A–7,500W heaters
Main Voltage
3 x 208-230V, 50/60 Hz,
3 x 380V, 50/60 Hz
Electrical @
40A–7,500W heaters
Dimensions
28”w x 26”d x 52” h
(71cm x 66cm x 132cm)
Weight
265 lbs (120 kg)

Call 877-944-7697 or use the form below for info.

The PMCA Plural Component Proportioners

The PMCA Series of proportioners is air driven with opposed piston pumps. This unit ranges in outputs to 20 lbs/min (9.07 kg/min) at up to 1600 psi (110 bar) and outputs to 1.2 gal/min (4.54 liters/min) at up to 2400 psi (165 bar). This series is ideally suited for in-plant operations such as spa insulations, bed-liner or cavity fill.

PMCA-20
Output 1.2 gal/min (4.54 liters/min)
Max Working Pressure 2,400 psi (165 bar)
Max Hose Length 310 ft (94.5 m)
Heater Wattage 7,500 watts Total (Single Heater)
Hose Heating Power 90 Volts
Max Fluid Temperature 190 F (87.7 C)
Air Consumption
@ 100 psi (6.9 bar)
26 scfm
Main Voltage 1 x 208-230V, 50/60 Hz
Electrical @ 45A–7,500W heaters
Main Voltage 3 x 208-230V, 50/60 Hz,
3 x 380V, 50/60 Hz
Electrical @ 38A–7,500W heaters
Dimensions 40”w x 19”d x 52”h
(101cm x 48.cm x132cm)
Weight 250 lbs
(113.4 kg)